• m1
  • m2
  • m3
  • m4
  • m5
m11 m22 m33 m44 m55
 
 
 

Calibration of Venturimeter
(Closed Circuit System)

 
Venturimeter 1” size of 13 mm throat diameter with 2 G.M. valves

M.S. reservoir with gauge glass & scale fitting, drain valve of½” size & a bend.

M.S. collecting as well as measuring tank with bypass arrangement & drain valve of 1” size.
A gauge glass & scale fitting are fitted on measuring tank for discharge measurement.

½ m height double column differential manometer. (without Mercury)

½ HP high head monoblock pump for water circulation

Strong iron stand to support the unit

Entire unit is powder coated with good colour combination

Instruction manual 1 copy

Calibration of Venturimeter
 
 

 

Calibration of Orificemeter
(Closed circuit system)

   
Orificemeter suitable for 1” size pipe line & d/D ratio is 0.6 with 2 G.M. valves

M.S. reservoir with gauge glass & scale fitting, drain valve of½” size & a bend

M.S. collecting as well as measuring tank with bypass arrangement & drain valve of 1” size.
A gauge glass & scale fitting are fitted on measuring tank for discharge measurement

1/2m height double column differential manometer (without Mercury)

½ HP high head monoblock pump for water circulation

Strong iron stand to support the unit

Entire unit is powder coated with good colour combination

Instruction manual 1 copy

Calibration of Orificemeter
 

 
Calibration Test Rigs for Measuring Discharge of Water Through Venturimeter & orificemeters
(Closed circuit system)
 

Venturimeter suitable for following different sizes pipe lines with 2 G.M. valves.
i. 50 mm. inlet dia.
ii. 40 mm. inlet dia.
ii. 25 mm. inlet dia.

Orificemeter suitable for different sizes of pipe lines & d/D ratio is 0.6 with 2 G.M. valves.
i. 50 mm. inlet dia.
ii. 40 mm. inlet dia.
iii. 25 mm. inlet dia.

M.S./G.I. piping system for mounting the Venturimeters & Orificemeters. Each pipe having the respective Venturimeters, & Orificemeters, the pressure tapings with separate cocks connected to a common middle manifold which is connected to the manometer & G.M. gate valve

M.S. reservoir with gauge glass & scale fitting, drain valve of ½ ” size & a bend.

M.S. collecting as well as measuring tank with bypass arrangement & drain valve of 1” size. A gauge glass & scale fitting are fitted on measuring tank for discharge measurement.

1 m height double column differential manometer (without Mercury)

1 HP high head monoblock pump for water circulation

Strong iron stand to support the unit

Entire unit is powder coated with good colour combination

Instruction manual 1 copy

 

 
Calibration of orificemeter, Venturimeter & Rotameter Test Rigs
(Closed circuit system)
Calibration of orificemeter, Venturimeter & Rotameter Test Rigs
 

Venturimeter 1” size having 13 mm throat diameter with 2 G.M. valves

Orificemeter suitable for 1” size pipe line & d/D ratio is 0.6 with 2 G.M. valves

High precision properly calibrated rotameter suitable for 1” size pipe line having 4.2 to 42 LPM capacity

M.S. / G.I. piping system for mounting the Venturimeter & Orificemeter Each pipe having the pressure tapings with separate cocks connected to a common middle manifold which is connected to the manometer & G.M. gate valve

M.S. reservoir with gauge glass & scale fitting, drain valve of ½ ” size & a bend

M.S. collecting as well as measuring tank with bypass arrangement & drain valve of 1” size. A gauge glass & scale fitting are fitted on measuring tank for discharge measurement

1 m height double column differential manometer (without Mercury)

1 HP high head monoblock pump for water circulation

Strong iron stand to support the unit

Entire unit is powder coated with good colour combination

Instruction manual 1 copy

 
 

 
 
Calibration Test Rigs for Measuring Discharge of Water Through Orificemeters
(Closed circuit system)
 

Orificemeter suitable for different sizes of pipe lines & d/D ratio is 0.6 with 2 G.M. valves.
i. 50 mm. inlet dia.
ii. 40 mm. inlet dia.
iii. 25 mm. inlet dia.

M.S. / G.I. piping system for mounting the Orificemeters. Each pipe having the respective Orificemeters, the pressure tapings with separate cocks
connected to a common middle manifold which is connected to the manometer & G.M. gate valve.

M.S. reservoir with gauge glass & scale fitting, drain valve of ½ ” size & a bend.

M.S. collecting as well as measuring tank with bypass arrangement & drain valve of 1” size.
A gauge glass & scale fitting are fitted on measuring tank for discharge measurement

1 m height double column differential manometer (without Mercury)

1 HP high head monoblock pump for water circulation

Strong iron stand to support the unit

Entire unit is powder coated with good colour combination

Instruction manual 1 copy

 
 
Designed by : MID   Hosted by : GID   Promoted by : PBD